- Slicing of smoked fish, particularly cold smoked salmon, can introduce Listeria monocytogenes contamination even when incoming fish are initially uncontaminated.
- Slicing has a negative influence on the shelf-life of cold smoked salmon by increasing surface area and releasing nutrients that support bacterial growth.
- Slicing equipment can act as a long-term vector for L. monocytogenes contamination, with evidence of persistence in some plants for several years.
- Regular and effective cleaning and sanitising of slicing equipment is essential to prevent contamination and biofilm formation.
- Preventative measures, including appropriate cleaning frequency and verification, are key to maintaining food safety and extending product shelf-life.
Slicing and Slicing Equipment
In summary:
Slicing as a critical contamination point
Skinning and slicing are often the final process stages in the production of smoked fish. Several studies have shown that contamination of previously uncontaminated fillets with Listeria monocytogenes frequently occurs during slicing.
In a six-year monitoring study of a smoked salmon processing plant, genetically indistinguishable L. monocytogenes strains were repeatedly isolated from slicing equipment surfaces over more than three years, with 37% of slicer surface samples testing positive1. Similar findings were reported by Dass et al. in an Irish facility, where 6% of slicer and skinning machine samples tested positive for L. monocytogenes during a one-year surveillance period2. Johansson and co-workers also demonstrated that contamination could occur specifically during the slicing and skinning stages3.
Another study investigated the relationship between plant hygiene practices and L. monocytogenes occurrence in vacuum-packed gravadlax, cold smoked salmon and cold smoked rainbow trout4. Across 21 fish-processing plants, sampled on 5–7 occasions each, L. monocytogenes was isolated exclusively from sliced products, never from whole smoked fish, indicating that contamination is strongly associated with the slicing stage.
Effects of slicing on product shelf-life
The cutting and slicing of fish fillets can negatively affect the shelf-life of cold smoked salmon. Whole cold smoked fillets have been shown to remain acceptable for longer than sliced products5. This is likely due to the smaller surface area and fewer damaged cells in whole fillets, meaning fewer nutrients are available to support bacterial growth. By contrast, slicing increases the exposed surface area and can damage muscle tissue, releasing nutrients that facilitate microbial proliferation.
Transfer of L. monocytogenes via slicers
Aarnisalo and colleagues quantified how L. monocytogenes can spread between contaminated slicer blades and fish fillets4. When a blade contaminated with 6–9 log cfu/blade of L. monocytogenes was used, the first few slices exhibited contamination levels of up to 5.3 log cfu/g. Transfer then decreased rapidly, and predictive modelling suggested that after 39 slices, approximately 1.6 log cfu/g would still be transferred.
Similarly, when contaminated fillets (7.6 log cfu/fillet) were sliced using an uncontaminated machine, subsequent clean fillets became contaminated, with predicted transfer levels of about 1.5 log cfu/g after 39 slices. The group recommended discarding the first few slices from each new fillet; however, a more effective approach is to ensure slicing is only conducted using sanitary, verified-clean equipment(4).
Importance of regular cleaning and biofilm prevention
Unsanitary slicing equipment is a major vector for L. monocytogenes contamination and can also spread spoilage bacteria, further reducing product shelf-life. Slicing equipment and blades should therefore be cleaned and sanitised frequently, ideally every few hours, to prevent the establishment of L. monocytogenes biofilms4.
Strategies for decontamination include heat-based and chemical-based methods, which are discussed in detail in Decontamination using Heat and Decontamination using Chemicals.
Preventing biofilm formation on all food contact surfaces is essential. Hansen and Vogel reported that L. monocytogenes cells can survive for up to 49 days on food-grade stainless steel under typical fish-processing conditions of temperature, salt and humidity6. Survival was significantly extended when biofilms formed, highlighting the need for stringent cleaning, regular verification, and proactive biofilm control measures across all plant surfaces.
References:
- Di Ciccio,P., Meloni,D., Festino,A.R., Conter,M., Zanardi,E., Ghidini,S., Vergara,A., Mazzette,R. and Ianieri,A. (2012) Longitudinal study on the sources of Listeria monocytogenes contamination in cold-smoked salmon and its processing environment in Italy. International Journal of Food Microbiology 158, 79-84.
- Dass, S.C., Aby-Ghannam, N., Antony-Baby, S., Cummins, E.J., 2010. Ecology and molecular typing of L. monocytogenes in a processing plan for cold-smoked salmon in the Republic of Ireland. Food Research International, 24(5), 1529-1536.
- Johansson, T., Rantala, L., Palmu, L., Honkanen-Buzalski, T., 1999. Occurrence and typing of Listeria monocytogenes strains in retail vacuum-packed fish products in a production plant. Internation Journal of Food Microbiology, 47(1-2), 111-119.
- Aarnisalo K, Sheen S, Raaska L, Tamplin M. (2007). Modelling transfer of Listeria monocytogenes during slicing of ‘gravad’ salmon. International Journal of Food Microbiology 118, 69–78.
- Hansen,L.T., Rontved,S.D. and Huss,H.H. (1998) Microbiological quality and shelf life of cold-smoked salmon from three different processing plants. Food Microbiology 15, 137-150.
- Hansen,L.T. and Vogel,B.F. (2011) Desiccation of adhering and biofilm Listeria monocytogenes on stainless steel: Survival and transfer to salmon products. International Journal of Food Microbiology 146, 88-93.